Collar sizes: 21,3–168,3 mm
Run tube sizes: 33,7–550 mm
Pipe material: Copper
Machine type: Industrial machines
Most commonly used in:
TEC-150 Cu Collaring machine is optimized for tube branching in copper tubes. The branch tube is connected to the run tube by brazed joint. The machine drills the pilot hole and forms a collar to the tube. Unlike in TEC-150 for Mild and Stainless steel, there is no trimming of the collar.
|TEC-150 Cu ||Value
|Branch tube diameter ||Ø21,3–168,3 mm|
|Run tube diameter ||22–560 mm
|Material to be collared ||Copper|
|Air pressure ||6 bar
|Air consumption ||50 l/min
|Connected power ||5 kW
|Max fuses ||3 x 63 A
|Mains supply ||200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase
|Net weight ||1000 kg
|Machine dimensions ||See the layout drawing
|Noise level ||Max. 85 dB
Note! Above values are intended as a guide only.
Fields marked with * are mandatory.