Additional Information
Collar sizes: 21,3–168,3 mm
Run tube sizes: 33,7–550 mm
Pipe material: Aluminium, Copper, Stainless steel, Steel
Machine type: Industrial machines
Process: Collaring
The TEC-150 Collaring station is provided with automatic work cycles for cutting the pilot hole and for collaring the pipe. Automatic operations are controlled from an interactive control panel. The entire process from pilot hole milling to collar trimming is carried out in a single workstation.
Capacity Chart for Maximum Run Tube Wall Thickness in mm (run tube size on the left and branch size on the top)
Technical Information of the TEC-150 Collaring Machine
TEC-150 | Value |
---|---|
Material suitable for collaring | Iron, Stainless steel, Aluminium, Copper, Copper-Nickel |
Branch tube Ø by collaring method | 21,3–168,1 mm, option 219,1 mm (pilot hole for 219,1 collar is made separately) |
Run tube Ø by collaring method | 33,7–550 mm |
Smaller run/branch pipes are possible to fabricate by ball pull method; please contact T-DRILL Sales | |
Max. wall thickness | See cabability chart |
Mains supply | 200-240 V / 50 Hz /60 Hz, 3-phase 400-480 V / 50 Hz /60 Hz, 3-phase |
Fuse size | Max 3 x 63A |
Connected power | 5 kW |
Air pressure | 6–8 bar |
Air consumption | 50 l/min |
Machine dimensions | See the layout drawing |
Package dimensions | 1900 x 1350 x 2050 mm (L x W x H) |
Net weight | 1000 kg |
Gross weight | 1300 kg |
Noise level | Max 85 dB |
Note! Above values are intended as a guide only.
Fields marked with * are mandatory.