TEC-150 & Automatic Positioning System


Collar sizes
: 21,3–168,3 mm
Pipe material: Aluminium, Carbon steel, Stainless steel, Steel
Machine type: Industrial machines
Process: Collaring

Most commonly used in:

TEC-150 Automatic Positioning System (APS)

TEC-150 Collaring machine with NC-controlled Automatic Positioning System (APS). With the system the pipe can be positioned to the desired position and angle.The positioning system consists of rails and pipe indexing unit.

The machine can be moved longitudinally on the rails, while the pipe stays stationary. The task of the indexing unit is to rotate the pipe, when the collars should locate on different angle to each other. The positioning system is easy to operate with the help of a pendant control.

NC-controlled Automatic Positioning System 6000

The T-DRILL NC-positioning system is to be used as a part of T-DRILL TEC-150 collaring machine. The APS is for positioning the wanted position of pipe and the collar angle. Automatic operations are controlled from the control panel of the machine and the pendant control.

  • For diameters 26,9–410 mm and lengths min. 3 x O.D. and max 6000 mm
    (When working with small diameters, please contact T-DRILL Sales to ensure the l min measurement)
  • Positioning tolerances:
    – length +/- 0.5 mm (machine); +/- 1.0 mm (tube)
    – angle +/- 0.5º (machine); +/- 1.0º (tube)
  • Longitudinal and angle position can be seen from digital read-out

TEC-150 & Automatic Positioning System

Capacity Chart for Maximum Run Tube Wall Thickness in mm

(run tube size on the left and branch size on the top)

capacity_chart_tec_series_mm_

TEC-150
Value

Material suitable for collaring
Iron, Stainless steel, Aluminium, Copper, Copper-Nickel


Branch tube Ø by collaring method21,3–168,1 mm, option 219,1 mm (pilot hole for 219,1 collar is made separately)
Run tube Ø by collaring method33,7–550 mm

Smaller run/branch pipes are possible to fabricate by ball pull method; please contact T-DRILL Sales
Max. wall thickness
See cabability chart

Mains supply
200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase


Fuse size
Max 3 x 63A

Connected power
5 kW

Air pressure
6–8 bar

Air consumption
50 l/min

Machine dimensions
See the layout drawing

Package dimensions
1900 x 1350 x 2050 mm (L x W x H)

Net weight
1000 kg

Gross weight

1300 kg

Noise level
Max 85 dB

Note! Above values are intended as a guide only.

Read more about the distances between collars

 

tec-150_collar_heights

Feel free to ask for more information:

Fields marked with * are mandatory.


First name *

Surname *

Mobile phone

Email *

Company *

Country *

Company website

Street Address

Zip / Postal Code

City

State

Business sector

HVAC

HVAC

Heating, Air Conditioning, Ventilation

Refrigeration

Water Heating

Solar Panels

Automotive

Automotive

Engine Cooling

Exhaust (Exhaust Circulation, Muffler, sensors)

Brake and Fuel

Air Conditioning

Power Steering

Shipbuilding

Shipbuilding

Naval Shipyard

Civilian and Cargo Shipyard

Repair Shipyard

Stainless Steel Enterprises

Stainless Steel Enterprises

Water Treatment

Food, Dairy and Brewery

Pharmaceutical and Chemical Industry

Liquid Level and Flow Measurement

Water Pumps/Boosters, Circulation

Plumbing and Mechanical Contractors

Plumbing and Mechanical Contractors

Other, What?

Position in the Company

Department

Message

Upload File

Please enter the solution to prevent spam: 1 + 3 =

Your message was sent succesfully!

Contact our Sales and we will gladly help you determine the optimal solution for all your tube and pipe processing needs.