Collar sizes: 21,3–219,1 mm
Run tube sizes: 33,7–550 mm
Pipe material: Aluminium, Carbon steel, Stainless steel, Steel
Machine type: Industrial machines
Most commonly used in:
T-DRILL TEC-150-8 HD is the most powerful collaring machine for Schedule 40 pipes. You can make collars on run tubes with wall thickness up to 12,7 mm up to 168,3 mm. The bigger branch size Ø 219,1 mm is limited to max. 6,3 mm wall thickness.
TEC-150 HD Collaring Station is now stronger and easier to handle than ever! Entire process from pilot hole milling to a complete, beveled branch can be performed in a single workstation.
Collars can be formed in most ductile materials, including stainless steel, carbon steel, copper/nickel, brass and aluminium. Depending on the material thickness and elongation, collars can be made for SCH 40 pipes according to the capability chart shown in Technical Information.
Video of the basic TEC-150 Collaring machine:
Capacity Chart for Maximum Run Tube Wall Thickness in mm (run tube size on the left and branch size on the top)
TEC-150 SCH40 capacity table is only for the tool strength. It does not indicate anything about:
– collar quality
– wall thinning
– ability of material to withstand collaring
Note! In 1:1 cases, please contact T-DRILL Sales.
|TEC-150-8 HD ||Value|
|Operating voltage ||200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase
|Collar diameter ||21,3–219,1 mm
|Run tube diameter ||33,7–550 mm|
|Max. wall thickness ||See the capacity table
|Material suitable for collaring ||Iron, Stainless steel, Aluminium, Copper, Copper-Nickel
|Compressed air supply ||6 bar
|Compressed air consumption ||50 l/min
|Connected power ||6 kW
|Fuse sizes ||3 x 63 (max)
|Machine dimensions ||See the layout drawing
|Weight ||1000 kg
|Noise level ||Max. 85 dB
Note! This table is intended as a guide only.
Fields marked with * are mandatory.