Collar sizes: 21,3–219,1 mm
Run tube sizes: 33,7–550 mm
Pipe material: Aluminium, Carbon steel, Stainless steel, Steel
Machine type: Industrial machines
Most commonly used in:
The collaring range of TEC-150-8 machine is even up to 219,1 mm on run pipes 33,7–550 mm. The machine makes the elliptical pilot hole, forms a collar from the run pipe and trims the collar up to 168,3 mm. Pilot holes larger than for 168,3 collar are burned manually, e.g. with plasma cutter before placing the pipe to the machine.
There are the following modifications compared to the basic machine TEC-150:
Capacity Chart for Maximum Run Tube Wall Thickness in mm (run tube size on the left and branch size on the top)
|Collaring diameter ||Ø21–219,1 mm (pilot hole for 219,1 mm collar is made separately)
|Run tube diameter ||Ø33,7–550 mm
|Tube material ||Carbon steel, Stainless steel, Copper-Nickel and Copper, Aluminium
|Mains supply ||200-240 V/ 50/60 Hz, 3-phase
400-480 V/ 50/60 Hz, 3-phase
|Rated power ||5 kW
|Main fuse ||Max 3 x 63A
|Net weight ||1000 kg
|Machine dimensions ||See the layout drawing
Note! The above values are intended as a guide only.
Fields marked with * are mandatory.