TCC-25 TPS Tube Processing System


Pipe material
: Copper
Machine type: Industrial machines
Process: Cutting, End forming

Most commonly used in:

TCC-25 TPS Tube Processing System

This special system is cutting copper tubing from coil. After cutting, one tube end becomes closed by spinning operation fully automatically.

The system consist of T-Drill standard TCC-25 Automatic Chipless Rotary tube cut-off machine. It takes the tubing from coil, straightens it and finally cuts to length. After that the tubes are guided to a single (= the leading tube end only) Tube End Spinning Station automatically. Since TCC-25 is able to cut the tubes very fast into length, the spinning station incorporates two separate spinning units in order to increase rate of production.

TCC-25 TPS Tube Processing System

TCC-25-TPS
Value

Diameter of the tube to be cut
O.D. Ø5–10 mm

Wall thicknesses
0,4–0,8 mm

Material of the tube
Copper

Material length range
150–550 mm

Compressed air supply
600 kPa = 6 bar

Connected power
5,8 kW

Fuses max.
3 x 63 A

Supply voltage
200-240 V / 50 Hz /60 Hz, 3-phase, 400-480 V / 50 Hz /60 Hz, 3-phase


Weight of the machine
1180 kg

Note! Above values are intended as a guide only.

TCC-25 TPS Tube Processing System

TCC-25 TPS Tube Processing System

Feel free to ask for more information:

Fields marked with * are mandatory.


First name *

Surname *

Mobile phone

Email *

Company *

Country *

Company website

Message

Upload File

Please enter the solution to prevent spam: 1 + 3 =

Your message was sent succesfully!

Contact our Sales and we will gladly help you determine the optimal solution for all your tube and pipe processing needs.