Pipe diameters: 1,5–22 mm, 8–50,8 mm
Pipe material: Aluminium, Copper, Stainless steel, Steel
Machine type: Industrial machines
Most commonly used in:
If you have a need to cut both tubes from coil and from rackloading systems for straight length tubes, this machine is the best solution for that purpose.
In this system both properties have been combined to one machine.
With this machine you can cut straight tube diameters 6–45 mm and coil tubes 1,5–22 mm of various materials such as copper, aluminum, stainless steel.
Typical application areas are in automotive industry and heat exchanger industry etc, where good cutting quality and superior production speed is needed.
|TCC-50 RL + Coil||Value|
|Mains supply ||200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase
|Cutting range ||From coil: Ø1,5–22 mm
Straight tubes: Ø6–45 mm
|Wall thickness ||From coil: 0.3 - 3 mm
Straight tubes: 0,4–2,5 mm (depending on the tube material)
|Material ||Alumium, Copper, Steel
|Repeating accuracity ||+/- 0.1 mm/stroke
|Min. cut lengths ||3 x O.D.
|Typical production rates ||800–2200 pcs/h depending on cut length, material and required cut quality
|Main fuse ||Min. 3 x 16A Maks.3 x 63 A
|Noise level ||80 dBA
Note! Above values are intended as a guide only.
Fields marked with * are mandatory.