Pipe material: Aluminium, Carbon steel, Stainless steel, Steel
Machine type: Industrial machines
T-DRILL T-115 measuring table is used for controlled and precisely dimensioned transfers of pipes in the angle and axial directions. Using the measuring table it is possible to estimate accurately both the distance as well as the angle gap between two collars (or the start-off point and the collar). The measuring table is suitable for pipe sizes Ø33,7–323,9 mm. The maximum length of the pipe is 3000 or 6000 mm.
THERE ARE TWO STANDARD LENGTHS AVAILABLE: For tube length 3000 mm and 6000 mm.
Tube Measuring Table 3000
Tube Measuring Table 6000
Technical information of Collaring Machine T-115
|Material to be formed||Aluminum, Copper, Stainless steel, Carbon Steel|
|Collar diameter||Ø 19–114,3 mm | .840” – 5.00” O.D.|
|Diameter of the run pipe||Ø33,7–323,9 mm | 1.315” – 12.750” O.D.|
|Max. wall thickness||See capacity chart|
|Sound level||Max. 78 dB|
|Operating voltage||200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase
|Measures of the unit||820 x 910 x 1230 mm
| 32,3 x35,4 x 48,4”
|Weight of the unit||250 kg I 551 lbs
(With tool table 360 kg)
Note! The values above are intended as a guide only.
Fields marked with * are mandatory.