Pipe material: Aluminium, Carbon steel, Stainless steel, Steel
Machine type: Industrial machines
T-110 measuring table is used for controlled and precisely dimensioned transfers of pipes in the angle and axial directions. Using the measuring table it is possible to estimate accurately both the distance as well as the angle gap between two collars (or the start-off point and the collar). The measuring table is suitable for pipe sizes Ø33,7–323,9 mm. The maximum length of the pipe is 3000 or 6000 mm.
THERE ARE TWO STANDARD LENGTHS AVAILABLE: For tube length 3000 mm and 6000 mm.
Tube Measuring Table 3000
Tube Measuring Table 6000
Layout Drawing of Collaring Machine T-110 & Positioning table for 3000 mm long tubes
Technical information of Collaring Machine T-110
|Collar diameter ||Ø 21,3–114,3 mm
|Diameter of the run pipe ||Ø 33,7–323,9 mm
|Maximum wall thickness ||See the capacity table
|Material to be formed ||Aluminium, Copper, Stainless Steel, Steel
|Sound level ||Max. 78 dB
|Measures of the unit ||See the layout drawing
|Weight of the unit ||250 kg
|Operating voltage ||200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase
|Fuses ||16 A
|Motor ||2,2 kW
Note! The values above are intended as a guide only.
Fields marked with * are mandatory.