T-110 Collaring Machine


Collar sizes
: 21,3–114,3 mm
Run tube sizes: 33,7–323,9 mm
Pipe material: Aluminium, Copper, Stainless steel, Steel
Machine type: Industrial machines
Process: Collaring

Most commonly used in:

 T-110 Collaring machine

Transportable collaring machine T-110 is designed for welded tube connections for run pipes 33,7–323,9 mm. The machine is 800 mm wide and the aim is to make it “easy to move” by manual- or motorized forklift.

The T-110 Collaring system consist of:

  • T-110 collaring machine
  • Pilot hole milling tool
  • Collaring tools (with forming pins+pin holder according to collar diameters
  • Trimming tool
  • Clamping tools according to run pipe diameters
  • Tool holders both side of the control panel.

The pilot hole tool, collaring tools and trimming tool are located at the tool holders both side of the control panel. The same tool holders can be used for tool setting. The buttons of the control panel are used to start and stop pilot hole milling, collaring and trimming cycles.

T-110 Working Cycle:

  • The operator mounts the tube inside the opened clamps.
  • The collar position is located and the clamps are closed by the operator.
  • The pilot hole tooling is mounted to the T-110 collaring machine by the operator and the elliptical pilot hole is milled according to the preset settings.
  • When the pilot hole is ready, the pilot hole tooling is replaced by the collaring tooling. Collar forming takes place.
  • When the collar is ready, the collaring tooling is replaced by trimming tooling. Trimming of collar takes place.
  • Finally trimming tool is removed from the T-110 collaring machine, clamps opened and the next collar can be positioned.

 

You might also need:

T-110 Collaring Machine

Technical information of T-110

T-110
Value
Collar diameter
Ø 21,3–114,3 mm

Diameter of the run pipe
Ø 33,7–323,9 mm

Maximum wall thickness
See the capacity table
Material to be formed
Aluminium, Copper, Stainless Steel, Steel

Sound level
Max. 78 dB

Measures of the unit
See the layout drawing

Weight of the unit
250 kg

Operating voltage
200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase

Fuses
16 A

Motor
2,2 kW

Note! The values above are intended as a guide only.

 

T-110 Collaring Machine

Layout Drawing of T-110

t-110_layout

 

You might also need

Feel free to ask for more information:

Fields marked with * are mandatory.


First name *

Surname *

Mobile phone

Email *

Company *

Country *

Company website

Street Address

Zip / Postal Code

City

State

Business sector

HVAC

HVAC

Heating, Air Conditioning, Ventilation

Refrigeration

Water Heating

Solar Panels

Automotive

Automotive

Engine Cooling

Exhaust (Exhaust Circulation, Muffler, sensors)

Brake and Fuel

Air Conditioning

Power Steering

Shipbuilding

Shipbuilding

Naval Shipyard

Civilian and Cargo Shipyard

Repair Shipyard

Stainless Steel Enterprises

Stainless Steel Enterprises

Water Treatment

Food, Dairy and Brewery

Pharmaceutical and Chemical Industry

Liquid Level and Flow Measurement

Water Pumps/Boosters, Circulation

Plumbing and Mechanical Contractors

Plumbing and Mechanical Contractors

Other, What?

Position in the Company

Department

Message

Upload File

Please enter the solution to prevent spam: 1 + 3 =

Your message was sent succesfully!

Contact our Sales and we will gladly help you determine the optimal solution for all your tube and pipe processing needs.