Pipe material: Aluminium, Copper, Copper / Nickel
Machine type: Industrial Machines / Portable tools
Process: End forming
The Power Notcher PND-54 is a device with pneumatic power source for cutting and dimpling the branched tube ends before insertion into the T-branch collar.
The PND-54 is a natural complement to the T-DRILL collaring (tee forming) system. It cuts a half-moon shaped coupon from each side of the branch tube to provide full flow, and presses simultaneously in a dimple that rests on the rim of the tee and acts as a depth stop. A second dimple 6 mm higher acts as a point of inspection.
This saves a lot of assembly time and the result is an inspectable brazed joint with the best possible flow characteristics.
The Power Notcher PND-54 is suitable for branch tube sizes 12, 14–16, 18, 22, 28, 35, 42 and 54 mm and for corresponding inch sizes: ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”.
|Power Notcher PND-54||Value|
|Length of the unit||750 mm / 30 in|
|Width of the unit||500 mm / 20 in|
|Height of the unit||1180 mm / 47 in|
|Weight of the unit||72 kg / 159 lbs|
|Compressed air supply||600 kPa / 6 bar|
Fields marked with * are mandatory.