Collar sizes: 21,3–168,3 mm
Run tube sizes: 33,7–550 mm
Pipe material: Aluminium, Carbon steel, Stainless steel, Steel
Machine type: Industrial machines
TEC-150 HD is the most powerful collaring machine for Schedule 40 pipes. You can make collars on tubes with wall thickness up to 12,7 mm. Maximum collar size is Ø 168,1 mm on 406,4 mm run tubes in Schedule 40 pipes on standard machine.
Entire process from pilot hole milling to a complete, beveled branch can be performed in a single workstation.
Video of the basic TEC-150 Collaring machine.
Capacity Chart for Maximum Run Tube Wall Thickness in mm
TEC-150 SCH40 capacity table is only for the tool strength. It does not indicate anything about:
– collar quality
– wall thinning
– ability of material to withstand collaring
Note! In 1:1 cases, please contact T-DRILL Sales.
|TEC-150 HD ||Value|
|Operating voltage ||200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase
|Collar diameter ||21,3–168,3 mm
|Run tube diameter ||33,7–550 mm
|Max wall thickness ||See the capacity table
|Material suitable for collaring ||Iron, Stainless steel, Aluminium, Copper, Copper-Nickel
|Compressed air supply ||6 bar
|Compressed air consumption ||50 l/min
|Connected power ||6 kW
|Fuse sizes ||3 x 63 (max)
|Machine dimensions ||See the layout drawing
|Weight ||1000 kg
|Noise level ||Max. 85 dB
Note! This table is intended as a guide only.
Fields marked with * are mandatory.