Additional Information
Collar sizes: 6–54 mm | ¼” – 2⅛”
Run tube sizes: 8–108 mm | 5⁄16” – 4 1⁄8”
Pipe material: Aluminum, Brass, Copper, Copper / Nickel, Stainless steel, Steel
Machine type: Industrial machines
Process: Collaring
The S-54 collaring machine with Automatic Feed Table (AFT) provides a solution for automatic making of collars (manifolds, headers) within range 6–54 mm (¼” – 2⅛”).
Using a touchscreen for input, the T-DRILL Interface provides on-screen prompts to guide the operator through the programming process. Up to 300 different programs can be stored with each containing as many as 300 steps. They can be stored as templates to be modified later or completely re-written. These programs can include steps to allow the operator to perform actions on the part not related to the T-DRILL process and then continue. Programs can be written, edited and stored on external workstations and moved to the T-DRILL Interface when needed.
The standard lengths for automatic feed tables are for maximum tubes of 1,500, 2,500, 3,500, 4,500, 6,000 and 8,000 mm (59”, 96” 118”, 236” and 315”). Other lengths are available on request.
The videos below shows a special version of AFT with two S-54 collaring units – T-DRILL S-54 Double Head AFT
Working cycle
Cycle time depends on number and size of collars as well as material used. For example, it takes 65 seconds to produce ten 8 mm (5/16”) outlets spaced 100 mm (4”) apart in a 1,500 mm (60”) copper manifold.
The S-54 with AFT is typically used for the production of air conditioning and floor-heating equipment and solar panel manifolds. The T-DRILL collaring method dramatically improves the quality of tube joints. It also makes the brazing operation easy to carry out since the collar fastens the branch tube to correct position, thus allowing brazing without other fixtures.
S-54 | Copper, Aluminium and Brass | Steel | Stainless Steel |
---|---|---|---|
Supply voltage | 200-240 V / 50 Hz /60 Hz, 3-phase 400-480 V / 50 Hz /60 Hz, 3-phase | 200-240 V / 50 Hz /60 Hz, 3-phase 400-480 V / 50 Hz /60 Hz, 3-phase | 200-240 V / 50 Hz /60 Hz, 3-phase 400-480 V / 50 Hz /60 Hz, 3-phase |
Collaring range | Ø6–54 mm | ¼” – 2⅛” | Ø10–54 mm | 3⁄8” - 2 1⁄8” | Ø10–54 mm | 3⁄8” - 2 1⁄8” |
Run tube diameter | Ø8–108 mm | 5⁄16” – 4 1⁄8” | Ø10–108 mm | 3⁄8” - 4 1⁄8” | Ø10–108 mm | 3⁄8” - 4 1⁄8” |
Spindle speed | 190–1000 rpm | 150–1050 rpm | 60–890 rpm |
Rated power | 3 kW | 3 kW | 3 kW |
Compressed air supply | 6 bar / 90 psi | 6 bar / 90 psi | 6 bar / 90 psi |
Air consumption | 55 l/min | 1.765 ft³/min | 55 l/min | 1.765 ft³/min | 55 l/min | 1.765 ft³/min |
Fuse | 3 x 16 - 25 (min. – max.) | 3 x 16 - 25 (min. – max.) | 3 x 16 - 25 (min. – max.) |
Weight | 200 kg | 450 lbs | 200 kg | 450 lbs | 200 kg | 450 lbs |
Dimensions of the unit | 930 x 280 x 1130 mm | 36” X 12” X 48” (D x W x H) | 930 x 280 x 1130 mm | 36” X 12” X 48” (D x W x H) | 930 x 280 x 1130 mm | 36” X 12” X 48” (D x W x H) |
Noise level | <70 dB(A) | <70 dB(A) | <70 dB(A) |
Note! The values above are intended as a guide only.
S-54 AFT | Value |
---|---|
Diameter of the tube to be collared | Ø8- 108 mm | Ø 5/16 - 4⅛" |
Min. length of the tube to be collared | 50 mm | 2'' |
Max length of the tube to be collared | 1,500, 2,500, 3,500, 4,500, 6,000 or 8,000 mm | 59'', 96'', 118'' or 236" |
Positioning tolerance between two consecutive collars | +/- 0.25 mm | +/- 0.01'' or better |
Connected power | 0.6 kW |
Air consumption | 65 l/min | 14,8 gal/min |
Dimensions of the unit (AFT 2500) + S-54 | 2,930 x 6,710 x 2,300 mm | 116''x260''x91'’ (L x W x H) |
Weight (AFT 2500) | 400 kg | 992 lbs |
Note! The values above are intended as a guide only.
Fields marked with * are mandatory.