Share on social media

S-54 with MFT Manual Feed Table

Collar sizes
: 6–54 mm
Run tube sizes: 8–108 mm
Pipe material: Aluminium, Brass, Copper, Copper / Nickel, Stainless steel, Steel
Machine type: Industrial machines
Process: Collaring

Most commonly used in:

S-54 Collaring Machine with Manual Feed Table

T-DRILL S-54 Tube branching machine can be equipped with Manual (MFT) that can produce header pipe with ten 8 mm outlets in a minute!

The MFT (Manual Feed Table) is very user friendly, safe and ergonomic. The standard versions are for 1500, 2500, 3500 and 4500 and 6000 mm long tubes. In some cases, it is possible to handle complex bent tubes, too.

The tooling for holding the tube depends on the tube end; different tooling for open and closed tube end.

With the MFT it is possible to make the positioning of collars on the whole tube length by using three selectable pre-drilled templates or using the pneumatic brake by foot pedal. As an option there is a digital positioning device with a display.

The tube can be rotated at standard intervals of 15 deg. Any degree interval is possible through the use of a different template. It is easy and quick to change templates when needed.

S-54 with MFT Manual Feed Table

Technical information of S-54

S-54Collaring of Copper, Aluminium and BrassCollaring of SteelCollaring of Stainless Steel
Supply voltage200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase
Collaring rangeØ6–54 mmØ10–54 mmØ10–54 mm
Diameter of run tubeØ8–108 mmØ10–108 mmØ10–108 mm
Spindle speed190–1000 rpm150–1050 rpm60–890 rpm
Rated power3 kW3 kW3 kW
Compressed air supply6 bar / 90 psi6 bar / 90 psi6 bar / 90 psi
Air consumption12,5 gal/min12,5 gal/min12,5 gal/min
Fuse3 x 16 - 25 (min - max)3 x 16 - 25 (min - max)3 x 16 - 25 (min - max)
Weight200 kg200 kg200 kg
Dimensions of the unit930 x 280 x 1130 mm (DxWxH)930 x 280 x 1130 mm (DxWxH)930 x 280 x 1130 mm (DxWxH)
Noise level<70 dB(A)<70 dB(A)<70 dB(A)

Note! The values above are intended as a guide only.


Technical specification of MFT

Diameter of the tube to be collared
Ø 8–108 mm

Min. length of the tube to be collared
50 mm

Max length of the tube to be collared
1500, 2500, 3500, 4500 or 6000 mm
Positioning tolerance between to consecutive collars
+/- 0.25 mm or better

Air consumption 65 l/min
Dimensions of the unit (MFT 2500) + S-54
950 x 6500 x 2300 mm (L x W x H)

Weight (MFT 2500)
210 kg

Note! The values above are intended as a guide only.

S-54 with MFT Manual Feed Table


Feel free to ask for more information:

Fields marked with * are mandatory.

First name *

Surname *

Mobile phone

Email *

Company *

Company website

City *

Country *

Business sector

Other business sector


Upload File

Please enter the solution to prevent spam: 1 + 3 =

Your message was sent succesfully!

Contact us

This site uses cookies in order to provide you with the best user experience. By staying on the site you are agreeing to our use of cookies.

OKRead more