Additional Information
Pipe material: Copper
Machine type: Industrial machines
Process: Cutting, End forming
Most commonly used in:
The T-DRILL TCC-25 TPS is a special system for cutting copper tubing from coil. After cutting, one tube end is fully automatically closed by spinning operation.
The system consists of T-DRILL standard TCC-25 Automatic Chipless Rotary tube cut-off machine. It takes the tubing from coil, straightens it and cuts to length. After that, the tubes are guided to a single (the leading tube end only) Tube End Spinning Station automatically. Since TCC-25 can cut the tubes very fast into length, the spinning station incorporates two separate spinning units in order to increase rate of production.
| TCC-25-TPS | Value |
|---|---|
| Diameter of the tube to be cut | O.D. Ø5–10 mm | Ø 0.2'' – 0.4'' |
| Wall thicknesses | 0,4–0,8 mm | 0.016'' – 0.031'' |
| Material of the tube | Copper |
| Material length range | 150–550 mm | 5.9'' – 21.6'' |
| Compressed air supply | 600 kPa = 6 bar | 87 psi |
| Connected power | 5,8 kW |
| Main fuse | Max. 3 x 63 A |
| Supply voltage | 200-240 V / 50 Hz /60 Hz, 3-phase, 400-480 V / 50 Hz /60 Hz, 3-phase |
| Machine weight | 1,180 kg | 2601 lbs |
Note! Above values are intended as a guide only.
Share on social media
